How to Use a Wood Router for Beginners?

A wood router is a potent and flexible tool, and the demand for it is very high when it comes to woodworking. You can create various unique edges onto your wood board with the help of this equipment.

The features that come with this equipment are marvelous, and the most eye-catching one is its speed. You will be able to create magical outputs with different bits (used on a wood router). A wood router is very friendly equipment to use, and the good thing is that with continuous practice, you will be a pro with this tool.

Your woodwork will be a task that you can easily complete without going through any hassle. To get a good grip about the use of this equipment, you should know all the steps from start to end.

If you are a beginner, this is a mandatory case for you. Following the article, you will get a step by step guide regarding this. Read on to find out more.


Check out the steps and follow them very precisely. If you find some key points that might help you throughout the woodworking task, note them down.


Step 1: Take Safety Precautions

It is a strategic step that you should take before you dive into your work. Use protective goggles and a pair of gloves to shield the vulnerable parts of your body.

You can also use a router table for your flexibility and ease of use. This table comes with an already fitted wood router, and with the help of this, you can move this equipment at any angle of your preference. If you are up for creating a masterpiece, use this table in all cases.

Step 2: Install the Router Bit of Your Choice

There are various types of router bits like ogee bit, straight cutting dado bit, cove bit, round-over bit, and rabbeting bit. Each of them serves with a unique purpose with the woodworking task. So, choose the one that fits your requirements.

Install the router bit carefully into the collet and make sure it is fitted perfectly. If it isn’t, the bits will vibrate in uncertain speed and might create some uneven wood edges that will surely disappoint you.

This situation is critical because the uneven edges will force you to apply extra effort and spend an additional amount of time to solve the problem, and you wouldn't want that, right!

After you are done installing the bits, the three-quarter of an inch of shank into the collet and give the overall installation a final check.

Step 3: Adjust the Motor Speed 

Most of the wood router comes with adjustable motor speed. The speeds of the router bits are completely dependent on the rotation of the motor.

It is best that you take information from the website before you head out to buy. Type 'best woodworking router' on Google, and you are good to go. From there, you will find different available information that will surely help you out.


Normally, the speed of the motor rotates the router bits for around 400 times every second. So, it looks like the speed of it is very high, and it will get uncomfortable if you use the same speed for every router bits.

Not only your workpiece will look out of shape, your flexibility and ease of work will also be a challenging one. So, buy the one that comes with adjustable speed features.

Step 4: Check the Wood Condition

There are various kinds of woods with different grains. You should be careful while you are using the wood router onto the grain. If you apply too much pressure, the woods might break into pieces. Make sure the bits are clean and not blunt. During the time of your cutting, move the router onto the line of the grain.

Step 5: Control the Router Strategically

As mentioned already, you should avoid moving the router against the grain at all times. There were various cases where the beginners have made this kind of accident due to a lack of knowledge and technique. Be smart and strategic and apply a proper technique in this step with patience and accuracy.

To get the desired outcome, check the rotation of the router first, and then move in the opposite direction. In other words, move it from left to right direction. By using this technique, you will get full control of this equipment, and it won't get detached from your hand if you change the speed in any situation.

Step 6: Finishing Touch

Congrats! You are done with your woodworking task with the help of a wood router. After getting your desired masterpiece, clean the whole area with a vacuum cleaner. Not only that, wipe the wooden board with a clean cloth if possible.


As you have seen, the steps are very simple and easy if you get a good grasp of it. If you have a vision about creating a wooden masterpiece, the wood router will help you out, turning that desire into reality.

Make your work an enjoyable one. Best of luck.

Check Also

How to Apply Spar Varnish? A to Z Guideline

You are quite done with your woodwork project – maybe a fine piece of furniture …

Leave a Reply

Your email address will not be published. Required fields are marked *